The contribution of industry to the transition to a sustainable energy system and reduction of CO2-emissions is essential. Dutch industry requires more than 500 PJ of heat per year. This heat is required to enable reactions, separation processes or for heating feedstocks. This energy demand is almost completely covered by the use of fossil sources such as natural gas, oil and coal. There are three routes towards sustainable industrial heat: process efficiency, reuse and upgrading waste, making the heat supply more sustainable.
Get in contact with Anton Wemmers
TNO develops innovative technologies and processes that reduce the fossil energy use, energy costs and CO2-emissisions for industry. In this way, we help government, industry and society with a transition to a reliable, sustainable energy system and meeting our climate targets. TNO cooperates with the manufacturing industry and industrial end-users on technological solutions to achieve this more sustainable industry.
Companies are increasingly looking for sustainable solutions for their processes. This is motivated by legislation, consumer demands for more sustainable products and cost reductions. The Netherlands has a large share of energy intensive heavy industry (chemicals, refining, steel, food, paper) with a large demand for heat. By decreasing the dependency on fossil energy carriers, the Netherlands and these industries benefit from increased competitiveness in the global market.
In addition, the Dutch knowledge economy profits from the development of innovative products and processes that have an export potential for technology suppliers. In this way, the transition to a sustainable energy system contributes to reinforcement of Dutch economy and stimulates job creation opportunities.
This is a route in which we develop efficient processes or unit operations for application in existing and new processes, thereby achieving a significant, step-by-step reduction in energy consumption.
In existing processes, implementation is often linked to the replacement or expansion of existing installations.
TNO is working on efficient separation technologies and on key technologies to increase conversion and/or selectivity, including membrane separation, cooled absorption, membrane reactors, advanced distillation and membrane capacitive deionisation (MCDI). In addition, they can be electrically driven (Power2Separate), offering the possibility of replacing fossil energy carriers with renewably generated electricity.
TNO's research has led to several inventions for new products and production processes that are market ready or are already in the market, for example HybSi® membrane technology for purifying solvents and HYSEP® hydrogen separation modules. In this way, we strengthen and help industry and business to become more sustainable.
TNO is working on several projects to reduce the heat demand in processes:
Reuse and upgrading waste heat from industrial processes is the second route. This solution is applied more close to the boundaries of the process, which simplifies implementation on short term to some extent. In addition, this is a generic solution that can be in multiple industrial sectors.
Energy that is used in industry eventually ends up in the ambient atmosphere as waste heat. This waste heat is released by active cooling, by flue gasses or by heat losses from installations. Reuse of this waste heat lowers the energy demand of an industrial process, lowers the energy costs and the emissions.
The problem with the reuse of industrial waste heat is that either the temperature level is too low to be reused in the process or the timing does not correspond with the need for heat. TNO develops several technological solutions to reuse this waste heat in cooperation with industry and technology partners.
Waste heat can be upgraded to higher temperature by use of heat pump technology. This can be accomplished in several ways. The generic challenges for industrial heat pump technology are:
A large application market with corresponding energy and emission reduction potential exists for industrial heat pumps, if the three conditions stated above are met. At the same time, this is a very interesting market for equipment manufacturers which would be able to supply innovative heat pump technology.
In cooperation with other similar scientific institutes in Europe, TNO has prepared a whitepaper on the relevance of industrial heat pumps for the industrial energy transition and presented this to the EU.
TNO is active in multiple projects in achieving the targets stated above.
Heat that is released from a process at the wrong time, can be stored to be reused at a later time. This can for example be applied in industrial batch processes where waste heat from one batch can be reused to preheat the next batch. Heat storage can also be applied to accommodate fluctuations in either supply or demand. Heat storage can be achieved in different ways, depending on the temperature level and the duration of the storage
Generic challenges with the development of heat storage systems are the efficiency (charge – discharge), stability of materials and investment costs.
Phase change materials (PCM) offer the opportunity to store heat at the melting point of a material. This has the advantage that large amounts of heat can be stored in a small temperature interval. This is an important advantage for the generation of industrial steam. A material with a suitable melting point is selected depending on the application. The FLEXSTEAM project develops a system that stores heat in a very compact way at 150°C.
The application of molten salts is studied for higher temperatures. The molten salt functions both as a heat transfer and heat storage medium. Heat can be transported and stored up till temperatures of 600°C. R&D on this concept is carried out within the SPOT project.
The third route is making the heat supply more sustainable. The use of fossil energy carriers is reduced when a renewable energy carrier is used for the production of heat. In turn, this will reduce the CO2-emissions.
TNO develop solutions for all these routes and combinations thereof. TNO supplies knowledge of both the technology and the processes and supports industry in their energy transition. The knowledge base is supported by an experimental infrastructure which enables to actually test innovations on a scale level that is relevant for industry:
"Strengthening Industrial Heat Pump Innovation in Europe"