Our work

Haliade X: measurements of the largest wind turbine ever have begun

The arrival of the world’s largest wind turbine – the Haliade-X 12MW on the Maasvlakte – heralds a new phase in the next generation of wind energy at sea. Experts from TNO will perform an the assignment of an extensive measurement programme on behalf of owner GE Renewable Energy. This helped to make the world's largest wind turbine a reality and will reveal whether the turbine lives up to expectations and meets the requirements that have been set . If so, the Haliade-X can then be taken into production and installed in large numbers on offshore wind farms.

This is important as at least 11.5 gigawatts of capacity must be installed in the North Sea by 2030. Wind farms with large turbines, such as the Haliade-X, are helping to achieve this ambition. With a capacity of 12 megawatts, it provides more energy than the current most powerful turbine. 67 gigawatts hours gross per year is sufficient for 16,000 European households.

Provisional type certificate achieved

Since the Haliade X is in operation, TNO performs measurements for certification as well as research purposes. The measurements have been successful and have contributed to the milestone of achieving the provisional type certificate issued by DNV GL. This certification demonstrates that the Haliade-X prototype has the highest safety and quality standards. The full type certificate is expected in the coming months.

Interested in participating in our knowledge platform?

Get in touch!


Pushing the boundaries for the haliade-x

TNO is one of the few organisations that is accredited to carry out the so-called certification measurements. This year, experts will perform extensive measurements on, in and around the Haliade-X 12MW offshore wind turbine. For TNO, this is a familiar scientific domain, but the unprecedented height (260 metres), blade length (107 metres) and diameter (220 metres) are pushing the boundaries of aerodynamic knowledge. GE’s design and calculations, as well as those of the manufacturers of the blades and other components, will be practically validated by measurements over a period of almost a year.

A unique combination of expertise

During the construction of the approximately 150-metre high tower on the Maasvlakte, TNO staff fitted it with numerous sensors to carry out the measurements. The nacelle to which the rotor blades are attached was also fitted with strain gauges, accelerometers and all kinds of other sensors during installation on the tower. During the production of the blades, which are more than 100 metres long, TNO experts at LM Wind Power in Cherbourg fitted various measuring instruments to them. TNO provides a unique combination of knowledge regarding wind, aerodynamics, sensors and models.

Leading the way with knowledge

In addition, a 135-metre high mast will be erected next to the turbine to measure all wind speeds and directions, as well as temperature and humidity, over a period of four seasons. The results of these meteorological measurements will be combined with those of LIDAR, a laser technology. Due to the rotation of the blades, the height of the mast is limited to 135 metres, so this technique is suitable for accurately measuring wind speeds and directions from the tip of the blade to the base. All of these measurements – in numerous places in and around the turbine and combinations thereof – are the first of their kind ever. Thanks to this knowledge, our country remains a global leader. TNO supports GE Renewable Energy in bringing their innovative products to the market in the shortest possible time.

TNO wants to set up a knowledge platform in the Netherlands for measuring wind turbines. Interested companies and knowledge parties from our country and beyond can participate in this platform.

Photo credits: GE Renewable Energy

Want to know more about wind energy as a sustainable energy source

Learn more
TNO Insights

TNO is working on the largest wind turbine ever

28 February 2019
It is the largest and most powerful wind turbine in the world – the Haliade-X, from GE Renewable Energy. Over the next five years, this turbine will be tested on the Maasvlakte (a large seaward extension... Read more

Towards large-scale generation of wind energy

The Dutch government has agreed with the energy sector that the near future will already see a substantial share of all energy generated from sustainable sources. In addition to solar energy, wind energy... Read more

Dr Peter Eecen

  • Wind Energy


Stay up to date with our latest news, activities and vacancies

TNO.nl collects and processes data in accordance with the applicable privacy regulations for an optimal user experience and marketing practices.
This data can easily be removed from your temporary profile page at any time.
You can also view our privacy statement or cookie statement.